Floor tile is a small segment of the flooring industry these days.
Unlike back in the 50's and 60's where everybody put tile down in their
kitchens, laundry rooms, bathrooms and basements most people these days
will install wood flooring, ceramic tile, vinyl sheet flooring or even carpet depending upon the application.
Back
in the day, vinyl tile was used extensively. It came in a different
sizes such as: 6"x6", 9"x9" and 12"x12" tiles. Very common back then
were the 9"x9" tiles and were probably vinyl asbestos.
If
your home was built before 1980 and has the original floor tiles down
in any room of the house then they probably contain asbestos. Especially
if they were the 9"x9" variety. Most manufacturers stopped making vinyl
asbestos tiles in 1978 but some continued until probably 1980. Even
after that there was a lot of vinyl asbestos tile floating around in
stores back rooms until the stock was finally exhausted.
Vinyl
asbestos tile is not inherently dangerous. The asbestos was
encapsulated into the vinyl tile itself. It cannot be released into the
air (where it becomes a health risk when breathed in) unless something
causes it to be released. Anything that can abrasively wear the surface
of the vinyl asbestos tile can potentially release the harmful asbestos
particles into the air. Normal wear and tear shouldn't be a problem.
Never abrade the surface of a vinyl asbestos tile. Never clean it with
steel wool or sand it for any reason as this will release the fibers
into the air. Cleaning it with vinyl floor cleaners is fine and is the
preferred method of cleaning. Be careful even scraping the surface of
the tiles.
So if you do have vinyl asbestos tile in your home there really shouldn't be a health risk.
When
the time comes to install a new floor in the room containing vinyl
asbestos tile there are many options. Most companies, when they find
that vinyl asbestos tiles are present on the job, will refuse to do the
job until the tiles are removed. This has to do with the liabilities
associated with vinyl asbestos tiles. But this is an overblown reaction
to the situation. New flooring can be safely installed over vinyl
asbestos tiles without any health risks whatsoever.
One
option is to remove the asbestos tiles. This can be a very expensive
proposition when employing a certified asbestos removal company or using
a contractor that is asbestos certified.
Another
option is just to go over the existing asbestos flooring. If the tile is
installed on a concrete floor, such as you would find in a basement,
you would just need to skim coat the surface of the asbestos tile. There
are products out there designed to be applied to the surface of the
asbestos tile that will allow another floor to be glued down on top.
Covering the old asbestos tile is a safe and entirely satisfactory
solution.
If
you have asbestos tile on top of a wood substrate such as plywood, OSB
or any other suitable base layer then you can install a layer of luan
over the top and then the new flooring thereby sealing in the asbestos
tile underneath. The old tile needn't be removed.
So
there you have it. Vinyl asbestos tiles are not inherently dangerous and
shouldn't be a cause of concern. Whether you are installing a new floor
over the top or still using your current asbestos tile flooring, vinyl
asbestos flooring is a safe and durable floor that will last decades. On
the other hand, a new floor would look pretty good right about now,
eh? LOL
Jeff Dean
Dover Floor Covering
http://www.doverfloorcovering.com
Sunday, May 29, 2016
Friday, May 13, 2016
Flooring Installations
A common misconception in the flooring industry is that all floor
companies are created equal and the thing that sets them apart is price.
Price is important but is it the most important? Of course not. I've run across people that assume when you are comparing flooring that the price should dictate where they buy their floors. They assume if the floors are the same (same brand) that everything else is equal. Nothing could be further from the truth.
Good installers are hard to find. They need to have 3 traits that will make them good installers.
You can find plenty of flooring installation contractors that have one or two of those traits but finding installation crews with all three traits is rare indeed. I've been in the floor covering business for over 37 years now and I've probably met 6 carpet installers that I would hire or use in my own home.
Beware the low cost flooring retailers and big box stores. They DO NOT hire the best. They hire by cost structure only. Is that who you really want in your home installing your new flooring. The lowest cost installation crews available?
Just something to think about......
Jeff Dean
Dover Floor Covering
www.doverfloorcovering.com
Price is important but is it the most important? Of course not. I've run across people that assume when you are comparing flooring that the price should dictate where they buy their floors. They assume if the floors are the same (same brand) that everything else is equal. Nothing could be further from the truth.
Good installers are hard to find. They need to have 3 traits that will make them good installers.
- They must be reliable and show up when they are supposed to
- They must be great at actually installing the flooring
- They must be good with the customers. After all, they are in their house
You can find plenty of flooring installation contractors that have one or two of those traits but finding installation crews with all three traits is rare indeed. I've been in the floor covering business for over 37 years now and I've probably met 6 carpet installers that I would hire or use in my own home.
Beware the low cost flooring retailers and big box stores. They DO NOT hire the best. They hire by cost structure only. Is that who you really want in your home installing your new flooring. The lowest cost installation crews available?
Just something to think about......
Jeff Dean
Dover Floor Covering
www.doverfloorcovering.com
Saturday, May 7, 2016
A Little Something About Vinyl Plank Flooring
Stuff About Vinyl Plank Flooring
Vinyl Plank Flooring is all the rage right now. But why?
Vinyl plank flooring has been around for a long time but just recently seems to have found it's niche. It has become a very popular flooring for basements. But surprisingly is being found even in kitchens.
So why is vinyl plank flooring so popular? In days gone past, people used to put peel and stick vinyl tiles in their kitchens. They were cheap, impervious to water and worked great for a kitchen. But people didn't like the fact that every 12" there was a seam. After the original 9" tiles, 12" tiles became the norm. So for every floor installed, there was a seam every 12" in both directions. People didn't like the fact that dirt would get into the seams and became hard to clean well.
So people started to buy linoleum. One of the main factors was that fact that it came in 6' and 12' widths. Almost no seams at all. So vinyl tile lost most of it's market share to linoleum which morphed into sheet vinyl goods. Sheet vinyl took over the lion's share of the market for years and years. So why now is vinyl plank flooring so popular when there are again seams every 4' long and maybe 6" to 8" wide?
Vinyl plank flooring is impervious to water, comes in individual pieces and is not very cheap. So it seems (no pun intended) like we are reverting back to the days of peel and stick vinyl tile except that it's not a cheap alternative as was old peel and stick vinyl tiles......
So again we ask, why is vinyl plank flooring so popular? Beats me!! LOL
Jeff Dean
Owner of Dover Floor Covering
www.doverfloorcovering.com
248-889-4253
Vinyl Plank Flooring is all the rage right now. But why?
Vinyl plank flooring has been around for a long time but just recently seems to have found it's niche. It has become a very popular flooring for basements. But surprisingly is being found even in kitchens.
So why is vinyl plank flooring so popular? In days gone past, people used to put peel and stick vinyl tiles in their kitchens. They were cheap, impervious to water and worked great for a kitchen. But people didn't like the fact that every 12" there was a seam. After the original 9" tiles, 12" tiles became the norm. So for every floor installed, there was a seam every 12" in both directions. People didn't like the fact that dirt would get into the seams and became hard to clean well.
So people started to buy linoleum. One of the main factors was that fact that it came in 6' and 12' widths. Almost no seams at all. So vinyl tile lost most of it's market share to linoleum which morphed into sheet vinyl goods. Sheet vinyl took over the lion's share of the market for years and years. So why now is vinyl plank flooring so popular when there are again seams every 4' long and maybe 6" to 8" wide?
Vinyl plank flooring is impervious to water, comes in individual pieces and is not very cheap. So it seems (no pun intended) like we are reverting back to the days of peel and stick vinyl tile except that it's not a cheap alternative as was old peel and stick vinyl tiles......
So again we ask, why is vinyl plank flooring so popular? Beats me!! LOL
Jeff Dean
Owner of Dover Floor Covering
www.doverfloorcovering.com
248-889-4253
Subscribe to:
Posts (Atom)